品名:1/4"聚氨脂牡蛎色木制洞洞板 孔板/货架、展示架类用有孔木背板/Oyster Pegboard backs/Pegboard panel/Perforated board/Perforated Hardboard/Pegboard sandwich panel/Pegboard Displays/Store Fixture 材质:MDF 等级:E1 and E2 . 甲醛释放量(ppm):0.03 标准模型提供:D6.6mm或D7.3mm圆孔、孔中间距1"×1" O.C.,圆孔平行排列。 标准尺寸:2440mm×1220mm/1822mm×1220mm. 标准颜色:白、黑、灰、牡蛎米黄/或PANTONE国际色1114种配色服务. 包装方式:托盘定量包装/或散装. 交货期:15天 Has more capacity to produce pegboard than any other fabricator in Zhongshan City,Guangdong on China. Our controlled punch presses can produce clean & sharp pegboard holes with accurate margins on all four sides. Pegboard is produced from hardboard and MDF (Medium Density Fiberboard).
Standard hole patterns include 1” x 1” OC, and Standard holes sizes are 9/32” and 1/4”.
Mechanization hole punching controls allow for varying spaces between rows of holes. Blank spaces are for logos, graphics or design variations. Peg hole column spacing can be varied through removing punches in our perforating dies.
You are not limited to standard pegboard patterns with Panel Processing.
Large rollouts are no problem with multiple punch presses in all of our plants. No job is too large, or too small.
At Panel Processing, Inc., hardboard & MDF is fabricated into a number of products, either perforated or solid. PPI does not produce hardboard from raw materials, but purchases it in large volume from major manufacturers primarily in Guangdong on China.
We fabricate both S2S (Smooth 2 Sides) and S1S (Smooth 1 Side) hardboard in thicknesses of 1/8", 3/16", and nominal 1/4" (7/32"). S2S dry process hardboard and thin MDF (Medium Density Fiberboard) comes in 3.0mm, 4.5mm,4.8mm 5.5mm and 5.8mm. The large & extensive inventory of sizes and types maintained at all of PPI’s manufacturing plants assures every customer of the best availability at the lowest net board cost possible.