杰出特性:
 
  1.全能束紧器及特别轨迹的扫刀,保证结帮后，
     鞋面均匀贴紧鞋楦,绝不发角,增进美观,提
     高品质。
  2.鞋头压着机构采用可调二段式压力,子母缸
     设计,使鞋子于扫刀结帮过程中及最后之压
     着能达到最佳之效果,确保帮角平衡。而且
     ，压头一次压采两种压着方式，定压时可使
     结构过程平顺,定位时，对比较柔软的皮料
     ,不容易发生帮距拉长及前档片下拉的现象。
  3.每双爪子均可配合鞋型,独立调整相对位置
     及自动平衡功能,并可视鞋面松紧度,选择左
     右独立自动下拉之行程动作。
  4.九爪独立式可个别调整配合任何形状之鞋头
     结构,其自动平衡及扫刀前进时自动下降的原
     理,更是提高品质增加产量的特性。
  5.扫刀具有寸动及调速功能,使结帮控制的调整
     作业更为方便。
  6.本机附有十字投影灯装置,方便鞋头校正作业
     ,同时新手更容易操作。
  7.内撑台有二段上升功能供选用,配合后跟顶座 
     动作,可防止鞋楦下滑之现象。
  8.爪子为快速拆装结构,可于30秒内换装完成。
  9.中爪可依鞋头型状作左右各15o之偏摆调整。
 10.内撑台上升高度,由外部遥控调整,并提供数
      字指示供参考,使操作更方便。
 11.结帮动作调整不需使用工作,并附有刻度及位
      置尺指示。
 12.各机构之压力与速度均可由外部调整,压力表
      亦配置在机台内部,使机械操作与调整更方便。
   
 13.内撑台上升有二段自动变速功能供选用,对于脆
      弱易破之鞋面,可提高其生产效率。
 14.最新设计之内外撑台前后调整机构,可针对各鞋
      型之大小号快速调整撑台和中爪之相对位置。
 15.回转爪结构
      第五爪结构于扫刀结帮时爪嘴可向内旋转,角度
      并可调整,使前中帮衔接角转处之鞋面能向内拉
      紧更贴楦,使鞋头的结帮品质达到完美的境界。
 16.爪盘大小快速调整结构
      爪盘采用双轨迹结构,左右分开独立位移调整,其
      旋转原点则不受空间限制,设定于中爪及第二爪之
      衔接处,故左右爪组于快速调整大小时,中爪之弧
      型位置,绝不会改变,可使鞋面于夹紧时更贴楦,确
      保结帮品质。

Outstanding feature
1.All-around forming band and specially tracked wipers ensure
 uppors more evenly and closely attached to lasts after lasting.
 No protrusion will happen so the surface becomes more beautiful,
 and the quality is upgraded.
2.The mechanism of toe part pressing pad adopts adjustable 2-stage
 oressure. Tho design of compound cylinder helps shoes reach the
 best quality on the proceedings of wiper lasting and final
 pressing and ensure the smoothness of shoe lasting feather edge.
 There are two pressing methods for the first pressure of toe pad
 pressing mechanism. The consistent pressing function makes the
 lasting process smoothly. The position fixed function avoids the
 over lasting and pulling down of toe uppers when using the soft
 leather.
3.Each set of pincers can be individually adjusted to their
 corrosponding positions and be functioned with automatic
 balancing. Besides an automatic down pulling stroke can be
 selected and controlled according to be tension of the uppers.
4.The 9 independent pincers can be individually adjusted to cope
 with the lasting of any shape of shoe toes. The automatic balance
 device and the theory of automatic desconding on wipers advancing
 are the very key points for upgrading the quality and raising the
 production capacity.
5.The wipers are functioned with inching movement and speed
 adjustment, which makes the whole adjustment of lasting control
 more convenient.
6.The machine is equipped with cross projector assembly, which is
 convention for correcting toe lasting and helps new comors to
 easily operate the machine.
7.The last support plate is functioned with two-stage rising
 mechanism which can prevent the lasts slip off in conjunction
 with the action of heel supporter.
8.The rapid installing and releasing structure for pincers can
 finish the whole process within 30 seconds.
9.The mid pincers can be adjusted 15O both to the right and the
 left according to the shape of toes.
10.The height of the last support plate is remotely controlled.
 There is a numerical instruction provided for reference which
 makes the operation easier and more efficient.
11.The lasting adjustment works without any tool. It is indicated
 on the rulers for graduation and position.
12.The pressure and speed for each mechanism are adjusted and the
 pressure gage is also installed at the outside of the machine which
 makes the operation and adjustment moreconveniently.
13.The rising speed of last support plate is two-stage automatically
 transferring which can upgrade the production efficiency for the
 easy broken uppers.
14.The newly designed forward-and-backward adjusting mechanism for
 last support plates can quickly adjust the corresponding position
 of last support plates and mid pincers according to the different
 sizes of shoes.
15.Rotary pincers: The fifth pincers can rotate inward when the
 wipers move in and last the shoes. The rotary angle can be
 adjusted, which will help the upper at ball point more stretched
 and attached to the last. Then, the shoes will be lasted and
 finished perfectly.
16.Speedy adjustment of pincers fixed plate: The pincers fixed
 plate adopts the double-tracking structure. It is independently
 adjusted on the right and the left. The rotary point of pincers
 fixed plate is located at the joint between the first and second
 pincers. The curve in between will not be changed when  the
 groups of right and left pincers are adjusted, which will made
 the uppers more attached to the lasts.