杰出特性:

1.结帮前,中底及鞋面不必先行擦胶,不但节省人工,而
  且成型后加热永不脱胶,确保完美之型状。
2.全能束紧器及特别轨迹的扫刀,保证结帮后,鞋面均
  匀贴紧楦头,绝对不发角,增进美观,提高品质。
3.鞋头压着机构采用可调二段式压力,子母缸设计,使
  鞋子于扫刀结帮过程中及最后之压着能达到最佳之
  效果,确保帮角平整。而且,压头一次压采两种压着
  方式，定压时可使结帮过程平顺,定位时,对比较柔
  软的皮料,不容易发生帮距拉长及前档片下拉的现象。
4.每组爪子具独立式自动下拉功能,操作者可视鞋面之
  松紧度,选控需要之爪子作自动下拉动作,而下拉之
  深度并可视需要调整。
5.九爪独立式可个别调整配合任何形状之鞋头结帮,其
  自动平衡及扫刀前进时自动下降的原理,更是提高品
  质增加产量的特性。
6.扫刀具有寸动及调速功能,使结帮控制的调整作业更
  为方便。
7.本机附有十字投影灯装置,方便鞋头校正作业,同时
  使新手更容易操作。
8.内撑台有二段上升功能供选用,配合后跟顶座动作,可
  防止鞋楦下滑之现象。
9.爪子为快速拆装结构,可于30秒内换装完成。
10.结帮动作调整不须使用工具,并附有刻度及位置尺指
   示。
11.内撑台上升高度,由外部遥控调整,并提供数字指示供
   参考,使操作更方便。
12.各种动作功能之选择开关,视操作者需要,可快速切换。
13.辅助扫刀结构
   a.辅助扫刀乃是配合九爪式前帮,使转头结帮长度加
     长到前中衔接转角处,经此结帮后,可使鞋头之皮面
     更贴合于鞋楦。
14.胶盘大小可调式结构
   a.一般使用自动上胶之前帮机胶盘均为固定式,不可
     任意调整,此大小可调整结帮为适应大小号鞋子于
     生产线上,同时混合生产时,不需要动用工具而可
     简单快速的调整胶盘的大小、宽度,以使胶着点能
     随大小号鞋子涂在适当之位置,使粘着效果更为完
     美,而同一型体之鞋子也不必因量多而更换胶盘。
15.回转爪结构
    a.第五爪结构于扫刀结帮时,爪嘴可向内旋转,旋转
      角度并可调整,使前中帮衔接转角处之鞋面能向内
      拉紧更贴楦,再配合辅助扫刀做结帮动作,使鞋头
      的结帮品质达到完美的境界。
16.爪盘大小快速调整结构
    a.爪盘采用双轨迹结构,左右分开独立位移调整,其
      旋转原点则不受空间限制,设定于中爪及第二爪
      之衔接处,故左右爪组于快速调整大小时,和中爪
      之弧型位置,绝不会改变,可使鞋面于夹紧时更贴
      楦头,确保结帮品质。

Outstanding feature
1.Before the step of lasting, insoles and uppers do not
 have to be manually cemented. The machine does not only
 save labor, but also ensure insoles and uppers never
 decemented when heated after lasting which always keeps
 shoes in perfect shape.
2.All-around forming band and specially tracked wipers
 ensure uppers more evenly and closely attached to lasts
 after lasting. No protrusion will happen so the surface
 becomes more beautiful, and the quality is upgraded.
3.The mechanism of toe part pressing pad adopts adjustable
 2-stage pressure. The design of compound cylinder helps
 shoes reach the best quality on the proceedings of wiper
 lasting and final pressing and ensure the smoothness of
 shoe lasting feather edge. There are two pressing methods
 for the first pressure of toe pad pressing mechanism.
 The consistent pressing function makes the lasting process
 smoothly. The position fixed function avoids the over
 lasting and pulling down of toe uppers when using the
 soft leather.
4.Each set of pincers has the function of independently
 automatic down-pulling. According to the elasticity of
 uppers, operators can control to pull down any certain
 pincer, whose depth can be adjusted subject to individual
 requests.
5.The 9 independent pincers can be individually adjusted
 to cope with the lasting of any shape of shoe toes. The
 automatic balance device and the theory of automatic
 decending on wipers' advancing are the very key points for
 upgrading the quality and raising the production capacity.
6.The wipers are functioned with inching movement and speed
 adjustment, which makes the whole adjustment of lasting
 control more convenient.
7.The machine is equipped with cross projector assembly,
 which is convenient for correcting toe lasting and helps
 new comers to easily operate the machine.
8.The last support plate is functioned with two-stage
 rising mechanism which can prevent the lasts slip off in
 conjunction with the action of heel supporter.
9.The rapid installing and releasing structure for pincers
 can finish the whole process within 30 seconds.
10.The lasting adjustment works without any tool. It is
 indicated on the rulers for graduation and position.
11.The height of the last support plate is remotely
 controlled. There is a numerical instruction provided for
 reference which makes the operation easier and more
 efficient.
12.The optional switches for every function can be rapid
 altered according to different operation.
13.Supplemental wipers：Owing to the assistance of
 supplemental wipers, the 9-pincer toe lasting machine can
 prolong the length of lasting down to cover the ball point
 of sole. After being lasted through the device, the toe
 upper will be more closely attached to the last. The
 structure of supplemental wipers is essential for making
 perfect shoes especially when a side and heel lasting
 machine will follow for one time forming.
14.Adjustable cement applicator：Grenerally, the cement
 applicator on an automatic toe cementing lasting machine
 is usually fixed and unadjustable. 737MA is different
 and can be adjusted. The structure of being adjustable
 quite fits the production of different shoes mixing on
 the same production line. Without any tool, the applicator
 can be easily and quickly adjusted to have an appropriate
 cementing position for different sizes of shoes, which
 will produce a perfect cementing effect and will not have
 to change applicator for making different sizes of saame
 tyle of shoes.
15.Rotary pincers：The fifth pincers can rotate inward when
 the wipers move in and last the shoes. The rotary angle can
 be adjusted which will help the upper at ball point more
 stretched and attached to the last. Then, by the aid of
 supplemental wipers, the shoes will be lasted and finished
 perfectly.
16.Speedy adjustment of pincers fixed plate：The pincers
 fixed plate adopts the double-trcking structure. It is
 independently adjusted on the right and the left). The
 rotary point of pincers fixed plate is located at the
 joint between the first and second pincers. The curve in
 between will not be changed when the groups of right and
 left pincers are adjusted, whiche the uppers more attached
 to the lasts.