独立包装，可随时使用，超高强度、自由流、不收缩水泥浆。FLOWGROUT SPECIAL是经过特殊加工的混合产品。<br><br>FLOWGROUT SPECIAL是一种包含填料和添加剂的经过加工的水泥。FLOWGROUT SPECIAL产品可随时用于灌浆，但是要求现场添加的水量必须十分精确（3.25升/25千克水泥）。FLOWGROUT SPECIAL适用于重型轮转设备和动载荷设备。对于间隙小于20mm的，可使用FLOWGROUT EP树脂基水泥浆（另有数据单表可供参阅）。对于厚度超过75mm的，在使用的水泥浆总量中可混合50%-100%比例的干净冲洗的10mm骨料。膨胀：可控的膨胀发生于未凝固的材料上，从而确保水泥浆在凝固的过程中，在填补的空隙范围内保持最初的体积。&nbsp;
<P align=justify>&nbsp;</P>
<P align=justify>技术参数<BR></P>25千克包所需水量：可涂抹稠度：3.25升（0.13水粉比），可流动稠度：3.75升；每25千克水泥浆产量：约12升；膨胀（%体积）：0.8 - 1.5；流动稠度（按照4551 P-12，BS：1980测试） ：18 - 22 cm。压缩强度：平均强度（千克/平方厘米），可流动稠度和可涂抹稠度按照BS 1881 - 116，1983测试。
<P></P>
<P></P>
产品英文描述:
FLOWGROUT SPECIAL is based on processed cement containing fillers and additives. FLOWGROUT SPECIAL supplied as ready to use grout requiring addition of precise quantity of water at site. (3.25 ltr/25 Kg of cement). FLOWGROUT SPECIAL is suitable for heavy rotary and dynamic load equipments. For less than 20mm gap FLOWGROUT EP resin base grout can be used (see separate data sheet for more information). For thickness excess 75 mm cleaned washed 10 mm down aggregates can be incorporated at the ratio of 50 to 100% of the quantity of grout used. Expansion: Controlled expansion occurs in the unset material to ensure that the grout, when cured will continue to occupy its original volume within the confines of the voids in which it was placed.  

TECHNICAL PROPERTIES