P.A.G

Granite Crystallizing Powder

This product can be used for crystallizing processing and regular maintenance of various granite.

It can make the granite surface bright and shining and can enable the granite surface harder and more wearable. There will be no damage to the stone after long use .It will not influence the air conductivity of the stone and will mot change the natural color and luster of the stone.

Directions of use

1.Surface must be clean and dry. Make sure all waxes, floor finish or other coatings are removed.

2.Mix the crystallizing powder with clear water. In the proportion of 1 to 1 to a viscous mixture before applying it to the stone surface.

3.Use a machine which designed for crystallization, equipped with a white or red polishing pad.

4.Move the machine onto the surface, first move left and right, then move up and down, polish until the floor becomes glossy and lustrous. Each operation covers about 3~5 square meters.

5.Repeat the above method to achieve a more crystalline and shiny effect.

6.Clean the floor with clean water and dry the floor when the entire crystallizing operation is completed.

WARNING:

This product is to be used only for floor crystallizing. Toxic by ingestion. Irritating to eyes and skin. Keep it away from children’s reach.

花岗岩结晶粉

此产品适用于各种花岗岩的结晶处理及日常养护，它使花岗岩表面光亮、坚硬、重涂性好。使石材长时间适用不受损坏，不影响石材的透气性和天然色泽。

适用说明

1、将石材表面原有的蜡及污物清理干净，使地表干爽。

2、使用前将结晶粉与水以1：1的比例调匀

3、将专用结晶机器安装上白洁垫。

4、将机器放在地表，以先左右后上下的顺序研磨至地表光亮。每次才做3～5平米。

5、重复以上操作，使地表更加光亮。

6、当整个结晶过程操作完成之后，清洗并吸干地表。

警告

此产品只用作地表结晶，服用中毒，对眼睛和皮肤有刺激，放在儿童接触不到的地方。