电 压:110v 220V  380V

功 率:2500W

温度范围：0-399℃

时间控制：0-999ses

气   压：8kg

工作台尺寸：38*38  40*40  40*50  40*60  60*80 cm

包装 尺寸：110*110*160  110*120*160  110*130*160 cm

重    量：140kg  150kg  160kg

Name:  Auto- wigwag twin table press machine

Model:GB-FA3838  GB-FA4050  GB-FA4060  G-FA6080

parameter:

Voltage:110v  220v  380v

power:2500w

Temperature range:0-399℃

Time range:0-180sec

Air pressure:0-8kg

Work table size:30*38 40*50 40*60 60*80 (cm)

Casing size:110*110*160 110*120*160 110*130*160 (cm)

Avoirdupois:140kg  150kg  160kg

Use:
This machine can press sublimation, impregnant printing ink color picture on cotton, hemp, fibre and another fabric by heat press, it also can use in technics heat

Equipment overall structural stability, not deformed running smoothly, small noise.
Automatic control, a smooth uniform pressure, the pressure up 8kg/cm.
Workbench can be run manually and automatically switch between.
Heating surrounded by the special design, uniform heating.
Work countertops special treatment, sublimation printers, thermal transfer, etc. Blocking products.

Characteristic ;
1. combines manual and gas-impulsed single table wigwag in one
2. digital control system PID Micro-computer controller .high precision ( 0.5℃)
3. all digital time show , high accuracy and strong heat exchange .
4. Heat Tube integrate with Heat Board in one unit , safety, durable, heat distribute uniformity.
5. pressure adjustable, easy operation , use in pipelining of factory widely.
6. beautiful appearance, auto wigwag come-and-go enable twin table operation, make it working more convenience. improve working efficiency . effective Solve the problem that machine works slowly before

Operation:1.turn on the switch of power , adjust the temperature ,time and air pressure to the requirement .2.when temperature reaches the set point ,please print the test sample firstly ,adjust the switch to “ manual “ position, confirm the quality of test sample is passed , then can adjust the switch to “ automatic “ to produce as a batch

3.when the switch was on “ manual “ position , please press the “ manual start” button ,the heating-plate will press down until the time is end then will automatic rise . eg: when find it is not the right position during the print process, should press “ urgent stop” button to stop print . when the switch is on “ automatic” position , just put the heating-plate to the right position then it can automatic press down.

Notice :

Must have a suitably and firm earth wire protection

Maintenance:1. air pressure : if the pressure is not enough or too much , you can loose or increase the pressure screw to adjust, turn to“ + ”for increase pressure , turn to “–” for loose pressure ( please note if has lube on the air-jar )2.temperature :when the temperature reaches to the set point while the heating-plate doesn’t work or heating not equality , please check if the temperature controller is turn on or circuit is destroyed.3. time : when the switch turn on “ manual “ position  but can’t press down when press the “ manual start “ button , please check “manual” switch . when the switch turn on “ automatic “  the board reaches the position but can’t press down, please check the mirco- switch if connect correctly in the box , please adjust if not .

4. please contact us if have any quality problem ..