| 机架式SURT 1K-3K |
|
| 详细信息 |
RT1K-3K (19") APC-MGE RT系列(1KVA-3KVA)19英寸机架式UPS采用先进的中央微处理器CPU控制技术,具有超宽的输入电压范围,带有输入功率因数校正、开机自诊断、输入零火线侦测以及RJ45局域网保护等功能,同时实现旁路输出人性化和计算机远程监控,并可搭配发电机使用。 1、软硬件集成化设计 独特的微处理器功能强大、体积小、故障率低、抗干扰能力强。直接通过RS232通讯口修改UPS的输出电压、输出频率。 2、高输入功率因数 电源输入端采用 PFC技术,使输入功率因数达到0.95以上,完全消除UPS对市电电网的污染,节约电网能源,因而是一种绿色电源。 3、开机自诊断功能 4、超宽输入电压与频率范围 120~300VAC(-45%~+40%)可适应恶劣的电力环境,以减少电池放电的次数,来延长电池的寿命,宽频率输入范围(47-53Hz),保证了UPS能搭配发电机供电,且UPS输出纯净稳定。 5、旁路输出人性化 6、长效机强大的充电能力 UPS接上市电时,对电池有5-10A的初始充电电流。 7、自动启动功能 当UPS断市电转电池逆变,而放至电池电压低保护后,来市电,能自动启动到市电逆变状态,无需人工开机。 8、正弦波输出 无论是市电逆变模式还是电池模式,均可输出低失真度的纯净的正弦波,为用户的负载设备提供最佳的保障。 APC-MGE RT系列220V机架式UPS技术参数 Specification of RT-APC-MGE rack mount UPS(220V)
型号Feature | RT1KL | RT1KS | RT2KL | RT2KS | RT3KL | RT3KS | 额定容量Capacity | 1kVA | 2kVA | 3kVA | 输入参数Input | | 输入电压制式Input voltage | 220/230VAC one phrase three line 单相三线制 | 输入电压范围Voltage Range | 120VAC~300VAC | 输入频率范围Frequency Range | 47~53(57~63)Hz | 输入功率因数Power Factor | ≥98% | 电池Battery | | 电池类型Type | 全密封免维护铅酸蓄电池 Sealed, Maintenance Free, Lead Acid | 电池组 额定电压DC Voltage | 36VDC | 72VDC | 96VDC | 电池数量Amount | 3PCS(外接) external | 3PCS(内含) internal | 6PCS(外接) external | 6PCS(内接) internal | 8PCS(外接) external | 8PCS(内接) internal | 充电电流currentBuilt-in Charger | 4A/8A | 0.7A | 4A/8A | 0.7A | 4A/8A | 0.7A | 输出参数Output | | 输出电压Nominal Voltage | 220VAC±2% one phrase three line单相三线制 | 输出频率Frequency | 50HZ±0.5% 或 60HZ±0.5% | 输出有功功率 Active power | 0.7kW | 1.4kW | 2.1kW | 输出电压波形畸变率Voltage harmonic distortion | <3%线性负载,<5%非线性负载 <3% linear load <5% non-linear load | 输出波形Wave form | 正弦波 | 阶跃型负载能力Load capability | 100% | 过载能力Overload capability | 100%-130% 30s 130%> 200ms | 输出插座类型 Socket type | 可按照各标准修改 Modifying according to different standard | 负载最大峰值因数Crest factor | 3:1 | 系统参数Parameter | | 整机效率Efficiency | ≥88% | 切换时间Transfer time | 0ms | 噪声Noise | <45dB | 面板显示PanelDisplay | LED、LCD | 警报声音Alarm | 停电时4秒一叫,电池欠压时1秒一叫,UPS异常时长鸣 Power cut, once every 4s; lack of battery’s voltage, once every 1s; ups abnormity, continuous | 整机尺寸Dimensions(W×D×H) | 437×468×88 | UHigh | 2U(1U=4.45cm) | 主机重量(KG)Net Weight | RW1KL | RW1KS | RW2KL | RW2KS | RW3KL | RW3KS | 7.8 | 17.5 | 9.6 | 8.6 | 10.0 | 9.0 | 通信及管理Communications | | RS232 | 随机配送联线,软件网上下载,市电异常、断电、电池容量,开关机等监控功能 Providing connection cable and on-line download of software; Possessing monitor function of mains abnormity, power down, battery capacity, turn on or turn off the ups and so on. | SNMP卡SNMP Card | Optional | RJ45接口interface | 提供局域网保护功能 Providing protection to LAN | 环境参数Environment | | 温度Temperature | 0℃~40℃ | 湿度Humidity | 20%~90% | 电池箱尺寸及重量 Dimension and weight of battery cabinet | RT1KL | RT1KS | RT2KL | RT2KS | RT3KL | RT3KS | 尺寸Dimensions(WXDXH) | 宽×深×高:437×448×88mm | 电池模块重量(KG) Weight of battery module(KG) | | | | 20.5 | | 25.5 | 电池规格数量 Quantity and specification of battery | 3节12V电池 3PCS12V | 3节7AH 3 PCS 7AH | 6节12V电池 6 PCS 12V | 6节7AH 6 PCS 7AH | 8节12V电池 8 PCS 12V | 8节7AH 8 PCS 7AH | 后备时间Backup time | | 5min | | 5min | | 5min |
APC-MGE RT系列110V机架式UPS技术参数
Specification of RT-APC-MGE rack mount UPS(110V) 1 | 型号Feature | RT1KL | RT1KS | RT2KL | RT2KS | | 2 | 额定容量Capacity | 1kVA | 2kVA | | 3 | 输入参数Input | | | | 输入电压制式Input voltage | 110/120VAC 单相三线制one phrase three line | | 输入电压范围Voltage Range | 60~150VAC | | 输入频率范围Frequency Range | 47~53(57~63)HZ | | 输入功率因数Power Factor | ≥98% | | 4 | 电池Battery | | | | 电池类型Type | 全密封免维护铅酸蓄电池Sealed, Maintenance Free, Lead Acid | | 电池组额定电压DC Voltage | 36VDC | 72VDC | | 电池数量Amount | 3PCS(外接)external | 3PCS(内含) internal | 6PCS(外接) external | 6PCS(内含) internal | | 充电电流currentBuilt-in Charger | 4A/8A | 0.7A | 4A/8A | 0.7A | | 5 | 输出参数Output | | | 输出电压 Nominal Voltage | 110VAC±2%单相三线制one phrase three line | | 输出频率Frequency | 50HZ±0.5% 或 60HZ±0.5% | | 输出有功功率Active power | 0.7KW | 1.4KW | | 输出电压波形畸变率Voltage harmonic distortion | <3%线性负载,<5%非线性负载 <3% linear load <5% non-linear load | | 输出波形Wave form | 正弦波 | | 阶跃型负载能力 Load capability | 100% | | 过载能力 Overload capability | 100%-130%维持30秒,130%以上200毫秒 100%-130% 30s 130%> 200ms | | 输出插座类型 Socket type | 可按照各标准修改 Modifying according to different standard | | 负载最大峰值因数Crest factor | 3:1 | | 6 | 系统参数Parameter | | | | 整机效率Efficiency | ≥88% | | 切换时间 Transfer time | 0ms | | 噪声Noise | 〈45dB | | 面板显示 PanelDisplay | LCD液晶显示面板+LCD指示灯 | | 警报声音Alarm | 停电时4秒一叫,电池欠压时1秒一叫,UPS异常时长鸣Power cut, once every 4s; lack of battery’s voltage, once every 1s; ups abnormity, continuous | | 整机尺寸Dimensions (W×D×H) | 437×468×88 | | U高 UHigh | 2U(1U=4.45cm) | | 主机重量(KG) Net Weight | RW1KL | RW1KS | RW2KL | RW2KS | | 7.8 | 17.5 | 9.6 | 8.6 | | 纸箱包装尺寸 | 长×宽×高:600×600×265mm | | 主机颜色 Color | 黑色 Black | | 7 | 通信及管理Communications | | | | RS232 | 随机配送联线,软件网上下载,市电异常、断电、电池容量,开关机等监控功能 Providing connection cable and on-line download of software; Possessing monitor function of mains abnormity, power down, battery capacity, turn on or turn off the ups and so on. | | SNMP卡SNMP Card | 选件Optional | | RJ45接口interface | 提供局域网保护功能Providing protection to LAN | | 8 | 环境参数Environment | | | | 温度Temperature | 0℃~40℃ | | 湿度Humidity | 20%~90% | | 9 | 电池箱尺寸及重量Dimension and weight of battery cabinet | RW1KL | RW1KS | RW2KL | RW2KS | | 尺寸Dimensions(WXDXH) | 宽×深×高:437×468×88mm | | | | 电池模块重量(KG)Weight of battery module(KG) | | | | 20.5 | | 电池规格数量Quantity and specification of battery | 3节12V电池 | 3节7AH | 6节12V电池 | 6节7AH | | 后备时间Backup time | | 5min | | 5min | | 10 | 随机配件: | RS232联线;中英文说明书、合格证、保修卡;外接电池箱的电池线;固定架及配件1套。 | | | | | | | | | | |
|